RMS-SNMP01A SNMP Card
User Manual
4 Managing the UPS on the WebUI
Issue 08 (2020-01-09)
Copyright © Huawei Technologies Co., Ltd.
50
Figure 4-34
Page for setting read and write communities for SNMPv1&SNMPv2c (first time
setting)
Figure 4-35
Page for setting read and write communities for SNMPv1&SNMPv2c (not first time
setting)
The default value of
SNMP port
is
161
, which is subject to change.
If you use Huawei NetEco, set
SNMP port
to
161
.
Click
Download UPS-RFC1628-MIB
on the page to download the MIB file which allows a
third-party NMS complying with the RFC1628 standard, such as UNMS of Generex, to
manage the UPS remotely.
Click
Download HUAWEI-UPS-MIB
to download the MIB file which allows a third-party
NMS complying with Huawei standard to manage the UPS remotely.
