Module
No.
Indicator
Status and Description
2
Link/Active/
Mode
indicator of
the SmartIO
port
l
Blinking blue slowly (1 Hz): The interface
module is working in FC mode, and the port
link is down.
l
Blinking blue quickly (2 Hz): The interface
module is working in FC mode, and data is
being transmitted.
l
Steady blue: The interface module is working in
FC mode, the port link is up, and no data is
being transmitted.
l
Blinking green slowly (1 Hz): The interface
module is working in ETH mode, and the port
link is down.
l
Blinking green quickly (2 Hz): The interface
module is working in ETH mode, and data is
being transmitted.
l
Steady green: The interface module is working
in ETH mode, the port link is up, and no data is
being transmitted.
l
Steady red: The port is faulty.
l
Off: The port is not powered on.
Power
module
3
Running/
Alarm
indicator of
the power
module
l
Steady green: The power supply is correct.
l
Blinking green: The power input is normal but
the disk enclosure is powered off.
l
Steady red: The power module is faulty.
l
Off: No external power input is found.
Controller
4
Link/Active
indicator of
the
management
network port
l
Steady green: The port is connected properly.
l
Blinking green: Data is being transferred.
l
Off: The port is connected abnormally.
5
Speed
indicator of
the
management
network port
l
Steady orange: Data is being transferred at the
highest rate.
l
Off: The data transfer speed is lower than the
highest speed.
6
Running/
Alarm
indicator of
the backup
power
module
l
Steady green: The backup power module is
fully charged.
l
Blinking green (1 Hz): The backup power
module is being charged.
l
Blinking green (4 Hz): The backup power
module is being discharged.
l
Steady red: The backup power module is faulty.
OceanStor 2600 V3
Product Description
4 Hardware Architecture
Issue 09 (2019-05-15)
Copyright © Huawei Technologies Co., Ltd.
48