15
Connectivity status indicator
16
Full-height PCIe slot
NOTE
This slot is reserved and does not install PCIe
here.
17
Half-height PCIe slot
-
-
NOTE
The default IP address of the management network port (Mgmt) on the quorum server is
192.168.128.200, and the default subnet mask is 255.255.255.0.
describes the indicators on the quorum server rear panel.
Table 4-34
Indicators on the rear panel
Num
ber
Indicator
Color
State
14
Data transmission status
indicator
Yellow
l
Off: No data is being transmitted.
l
Blinking: Data is being transmitted.
15
Connectivity status
indicator
Green
l
Steady green: The network is
properly connected.
l
Off: The network is not connected.
6
UID indicator
Blue
The UID button/indicator helps identify
and locate a quorum server in a rack.
You can turn on or off the UID indicator
by manually pressing the UID button or
remotely running a command on the
CLI.
l
Steady on: The quorum server is
located.
l
Off: The quorum server is not
located.
l
You can hold down the UID button
for 4 to 6 seconds to reset the
system.
2
Power module indicator
Green
l
Steady green: The power input is
normal.
l
Off: There is no AC power input, or
the power module is in the standby
state or is faulty.
OceanStor 2600 V3
Product Description
4 Hardware Architecture
Issue 09 (2019-05-15)
Copyright © Huawei Technologies Co., Ltd.
97