Step 2
Check the corresponding version checkbox (
,
,
) to enable the feature.
Step 3
Configure the SNMP settings.
NOTE
The settings of the SNMP software should be the same as the settings you configure here.
Step 4
Click
to save and finish the settings.
NOTE
It asks for a reboot for the settings to take effect.
----End
8.4.6 Configuring 802.1X Settings
The IEEE 802.1X standard is supported by the network domes, and when the feature is enabled,
the dome data is secured and user authentication is needed when connecting the dome to the
network protected by the IEEE 802.1X.
Before you start
Before you start, the authentication server must be configured. Please apply and register a user
name and password for 802.1X in the server.
Step 1
Enter the 802.1X Settings interface:
Configuration > Advanced Configuration > Network >
802.1X
.
Figure 8-15
802.1X Settings
Step 2
Check the
Enable IEEE 802.1X
checkbox to enable the feature.
Step 3
Configure the 802.1X settings, including EAPOL version, user name and password.
NOTE
The EAPOL version must be identical with that of the router or the switch.
Step 4
Enter the user name and password to access the server.
Step 5
Click
to finish the settings.
IPC6512-Z30&6522-Z30
User Guide
8 Speed Dome Configuration
Issue 02 (2014-12-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
49
