The configured preset can be deleted by clicking
.
----End
Calling a Preset
In PTZ control panel, select a defined preset from the list and click
to call a preset.
Or you can place the mouse on the presets interface, and call the preset by typing the preset No.
to call the corresponding presets.
Figure 7-7
Invoking a preset
7.4 Configuring Live View Parameters
Log in the network camera to enter the live view page, and the whole live view page can be
divided into five parts, which are Menu Bar, Display Control, Live View Window, Toolbar, PTZ
Control, and Presets Setting/Calling.
l
Menu Bar
Click each tab to enter Live View, Playback, Log and Configuration page respectively.
l
Display Control
Click each tab to adjust the layout and the stream type of the live view. And you can click
the drop-down to select the plug-in. For IE (internet explorer) user, webcomponents is
selectable. And for Non-IE user, webcomponents, VLC or MJPEG is selectable if they are
supported by the web browser.
l
Live View Window
Display the live video.
l
Toolbar
Operations on the live view page, e.g., live view, capture, record, audio on/off, two-way
audio, etc.
l
PTZ Control
Panning, tilting and zooming actions of the camera and the lighter and wiper control (if it
supports PTZ function or an external pan/tilt unit has been installed).
l
Preset Setting/Calling
Set and call the preset for the camera (if supports PTZ function or an external pan/tilt unit
has been installed).
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
7 Live View
Issue 02 (2014-12-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
70
