Huawei IPC6123-WDL-A User Manual Download Page 100

Page: 100 / 155

Step 2

Check the checkbox in front of textbox to enable the on-screen display.

Step 3

Input the characters in the textbox.

Step 4

Use the mouse to click and drag the red text frame Test in the live view window to adjust the
text overlay position.

Step 5

Click

NOTE

There are up to 8 text overlays configurable.

When setting many text overlays, the distance between any of the two texts cannot be more than 4
rows. Otherwise the text location may be offset.

If the video standard and resolution are set as 60Hz and 1080p, only one text overlay is supported.

Figure 8-26

Text Overlay Settings

----End

8.5.4 Configuring Privacy Mask

Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the
surveillance area from being live viewed and recorded.

Step 1

Enter the Privacy Mask Settings interface:

Configuration > Advanced Configuration> Image

> Privacy Mask

Step 2

Check the checkbox of Enable Privacy Mask to enable this function.

Step 3

Click

IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide

8 Network Camera Configuration

Issue 02 (2014-12-25)

Huawei Proprietary and Confidential

Summary of Contents for IPC6123-WDL-A




























































































































































Search results

Summary of Contents for IPC6123-WDL-A

Reviews:

Brands by name

Popular brands

Huawei IPC6123-WDL-A, User Manual

Search results

Summary of Contents for IPC6123-WDL-A

Reviews:

Brands by name

Popular brands