Step 3
Set the port mapping in
Forwarding
>
Virtual Severs
.
By default, the IPC uses port 80, 8000, 554, and 8200. You can change port values with a web
browser.
As shown in Figure B-3, one IPC's ports are 80, 8000, 554, and 8200, and its IP address is
192.168.1.23. The other IPC's ports are 81, 8001, 555, and 8201, and its IP address is
192.168.1.24.
Figure B-3
Setting the port mapping
Step 4
Enable all or TCP protocols and click
Save
.
After the port mapping is enabled, you can visit the IPC through the mapped ports. For example,
you can reach 192.168.1.23 through port 80 and 8000.
NOTE
The ports of the IPC must be different from other ports. For example, if the web management port is 80,
the service port must be changed to another value.
----End
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
B Port Mapping
Issue 02 (2014-12-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
146
