IPC2702-VF-VP
Quick Start Guide
3
Hardware Installation
Issue 10 (2014-02-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12
3.2.2 Installing a Dome Camera in Wall-Mounted Mode
When installing a half-mode camera in wall-mounted mode, you can install the
camera directory or by mounting the lower case to the wall.
Direct Installation
Step 1
Use the T15 screwdriver shown in Figure 3-1 to loosen the three plum screws on
the upper case, and remove the upper case, as shown in Figure 3-2.
Figure 3-1
T15 screw driver
Figure 3-2
Loosing screws
Step 2
Determine the installation location and use the Φ4.5 hammer driller to drill three
holes whose depth is more than 30 mm on the wall.
Step 3
Insert one white inflatable colloidal particle into the three holes respectively.
Step 4
Remove the three black screws on the lower case, as shown in Figure 3-3.
Step 5
Take out the three black 70 mm self-tapping screws from the PE accessory bag
and insert them into the three holes.
Step 6
Secure the half-dome camera on the wall, as shown in Figure 3-3.
Summary of Contents for IPC2702-VF-VP
Page 2: ......
