Huawei IPC2702-VF-VP, Quick Start Manual

Page: 11 / 40

IPC2702-VF-VP
Quick Start Guide 1 Installation Preparation
Issue 10 (2014-02-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
cloth before cleaning. After the dirt is removed, dry the device with a
cloth.

Never use any volatile solvents (such as the alcohol, benzene, and thinner)
or strong and abrasive alkaline detergent; otherwise, the device surface
may be damaged or the device performance may be reduced.
Environment Precautions

Never allow any water or other liquid to flow into the device. If any liquid
flows into the device by accident, power the device off, and remove all
cables (such as the power cord and network cable) connected to the device.

Avoid heavy weight, violent vibration, soaking during transport, storage,
and installation; otherwise, the device may be damaged.

Install the device at a place far away from the heat source or ignition
source, such as an electric heater or lighted candle.

Never install or use the device in places where flammable or explosive
materials are saved or in use.

Deploy surge protection devices if the device is installed outside.
 When working high above the ground, take security measures, such as
wearing helmets and safety belts and choosing secure elevating apparatus.
Personnel Precautions
The device-related installation and maintenance can only be performed by
professional technical engineers or specific installation personnel.
1.2 Checking the Installation Environment
Before installing the device, check the installation environment according to
Table 1-1.
Table 1-1 Installation environment check items
Check Item Standard
Moisture-resistant The relative environment humidity must be in the range
from 5% to 95%. If the humidity is higher than 95%, a
dehumidifier must be installed, such as an air
conditioner with the dehumidification function or a
dedicated dehumidifier. In addition, water seepage,
water dropping, and dew forming are not allowed.