Huawei IPC2702-VF-VP, Quick Start Manual

Page: 10 / 40

IPC2702-VF-VP
Quick Start Guide 1 Installation Preparation
Issue 10 (2014-02-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
Power Supply Precautions

Comply with the local electrical safety standards during device
installation.
 Use a power adapter matching this device. The power supply voltage must
meet the input voltage requirement.

Never power on the device before installation completes. Before installing
or removing a cable, stop using the device and power it off.

Verify that a proper power supply is used before running the device.

Keep the power plug to be clean and dry to prevent electric shock or other
risks.

When the device is installed in voltage instability regions, grounding the
device and releasing the surge of high-energy to prevent power equipment
burnning out.
Precautions for Use

Avoid heavy weight, violent vibration, soaking during transport, storage,
and installation; otherwise, the device may be damaged. Any damage
caused by improper transport of the assembled device during delivery
from or sending back to the manufacture for repair is out of the warranties.

Never install the device upside down. Hold the device with careful. Never
tightly press any structural parts; otherwise, mechanical breakdown may
occur.

Never dissemble the device to repair it. The device must be checked and
repaired by professional maintenance personnel.

Never scratch or abrade the device surface; otherwise, the paint that is
dropped down may cause allergy or device damage. For example, if it
drops into the host, electrical malfunction may occur.

If any exceptions occur, for example, smoke is blown out of the device, the
device sounds abnormally, or peculiar smell is found, stop using the device,
power it off, and remove all cables (such as the power cord and
networking cable) connected to the device.

If the device is faulty, contact the specified maintenance center for repair.
Cleaning Precautions

Before cleaning the device, stop using the device and power it off, and
then remove all cables (such as the power cord and network cable)
connected to the device.

Use a soft and dry cloth to clean the device. If there is any dirt that is
difficult to clean, place a few drops of mild detergent on a soft and clean