Huawei IPC1801-Z36 User Manual Download

Page: 6 / 94

IPC1801-Z36&2802-Z18&5802-Z20
User Guide

About This Document

Issue 12 (2014-06-12)

Huawei Proprietary and Confidential

Modified description about download log.

9.4 Upgrading Devices

Modified description about Upgrading Devices.

Deleted

2.2 Features

Deleted SD card storages.

Updates in Issue 07 (2013-06-30)

This issue is the seventh official release, compared to issue 06:

Modified

5.4 Setting OSD Parameters

Modified the description about OSD.

5.9 Configuring the Privacy Mask Function

Modified the Privacy Masking page.

5.10 Configuring the SD Card

Modified the SD Card page and description.

7.1 Setting I/O Alarm Parameters

Modified the alarm I/O page and parameters description.

9.3.1 Configuring a Permission Group

Modified the Reset Service Password page.

Updates in Issue 06 (2013-05-30)

This issue is the sixth official release, compared to issue 05:

Added

4.3 Browsing Videos

Added description about live view.

Updates in Issue 05 (2013-03-30)

This issue is the fifth official release, compared to issue 04:

Added

4.4 Controlling and Configuring the PTZ

Added description about special preset.

Modified

About This Document

Updated special notices.

2.2 Features

Summary of Contents for IPC1801-Z36































































































Search results

Summary of Contents for IPC1801-Z36

Reviews:

Related manuals for IPC1801-Z36

Brands by name

Popular brands

Huawei IPC1801-Z36, User Manual

Search results

Summary of Contents for IPC1801-Z36

Reviews:

Related manuals for IPC1801-Z36

Brands by name

Popular brands