IPC1801-Z36&2802-Z18&5802-Z20
User Guide
4 Quick Access
Issue 12 (2014-06-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
20
Button
Description
Brush
Click to clean the lens.
NOTE
This function is available only to a camera with a brush or a camera shield.
On/Off IR
Click to turn on or off the camera shields.
NOTE
This function is available only to specific camera shields.
Configuring the PTZ
If a camera has the PTZ or is connected to a PTZ, you can configure the PTZ in the
PTZ
Configure
area, as shown in Figure 4-7.
Figure 4-7
PTZ Configure area
In the
PTZ Configure
area, you can perform the following operations:
Add, delete, and invoke preset positions.
Add, delete, and invoke tracks.
Adjust the PTZ rotation speed.
Set the timer.
Enable or disable 3D positioning.
The 3D positioning function quickly rotates the PTZ and changes the focal length in
specific scenarios. You can also change the focus by drawing rectangle frames.
Set the direction to due north.
Any direction can be set as the reference due north.
Configuring and Invoking Preset Positions
You can configure preset positions and quickly rotate the camera to a preset position by
invoking the preset position.
The procedure is as follows:
Step 1
Configure a preset position.
