Huawei FusionPower6000 Product Description Download Page 47

Page: 47 / 63

Item

Specifications

Fault isolation There are three groups of 12 V ports. A group has a maximum

current of 660 mA, a route has a maximum current of 800 mA,

and the maximum total current is 2 A.
Group 1: AIDI_1 and DO/12V ports
Group 2: AIDI_2, COM1/AIDI_4, and COM3/12V ports
Group 3: AIDI_3 and COM2/AIDI_5 ports

Wireless

communicatio

Supports wireless communication that complies with

IEEE802.15.4.

Data traffic service: The 4G module is supported, and a

standard SIM card slot is provided to use the 4G SIM card of

China Unicom, China Mobile, or China Telecom.

NOTE

The prerequisite for using a SIM card is that the site has signal

coverage.

SMS service: Supports the 4G module, SMS sending, and 3G

communication, and provides a standard SIM card slot.
1. China: 2G and 4G networks support China Unicom or China

Mobile SIM cards, and 3G networks support only China

Unicom SIM cards.

2. Outside China: Select SIM cards according to the following

wireless modes and frequency bands:
● 4G: LTE-FDD, covering frequency bands B1, B3, B5, B7, B8

and B20; LTE-TDD, covering frequency bands B38, B40,

and B41

● 3G: WCDMA, covering frequency bands B1, B5, and B8
● 2G: GSM, covering frequency bands 900 MHz/1800 MHz

NOTE

● The prerequisite for using a SIM card is that the site has signal

coverage.

● Due to the performance limitation of the wireless module, China

Telecom SIM cards are not supported.

USB

● Supports USB 2.0 and 5 V, 1 A power supply.
● After installing the WiFi module, connect the WiFi module

to the ECC800-Pro using the app on the mobile phone or

PAD to view the basic information about the smart module,

such as layout, resources, energy efficiency, environment,

and alarms.

● You can insert a USB flash drive to export historical data

and configuration files and import configuration files.

SW button

● Restores the default IP address, factory settings, and user

information.

● Supports RF_Z (802.15.4) networking.

FusionPower6000

Product Description

4 Product Overview

Issue 02 (2021-06-30)

Summary of Contents for FusionPower6000
































































Search results

Summary of Contents for FusionPower6000

Reviews:

Related manuals for FusionPower6000

Brands by name

Popular brands

Huawei FusionPower6000, Product Description

Search results

Summary of Contents for FusionPower6000

Reviews:

Related manuals for FusionPower6000

Brands by name

Popular brands