Huawei FusionPower6000 Product Description Download Page 53

Page: 53 / 63

SW Button

Table 4-29 SW button description

Function

Description

Operation Description

Indicator Status

Wireless

network RF_Z

(802.15.4)

pairing

In non-wireless network (802.15.4)

pairing mode, press and hold down

the button for 3s to 5s to enter the

wireless network pairing mode.

The RF_Z indicator is

blinking at super

short intervals.

In wireless network (802.15.4)

pairing mode, press and hold down

the button for 3s to 5s to exit the

pairing mode; or the system

automatically exits the pairing mode

after 30 minutes without pressing

the button.

The RF_Z indicator is

blinking at long

intervals.

Press and hold down the button for

more than 8s to clear network

parameters.

The RF_Z indicator is

blinking at super

short intervals.

WLAN enabling

Press the button for less than 3s to

turn on the WLAN service.

Unavailable

Restoring the

default IP

address, factory

settings, and

user information

Hold down for 1 minute

Unavailable

4.2.3.1.3 Power Module

Indicators

Table 4-30 Power module indicator description

Indicator Color

Name

Status

Description

Green

Power

indicator

Steady on

The module has input power.

Off

The module has no input power

or is faulty.

Blinking at

long

intervals

The module is being queried

(the indicator blinks at 0.5 Hz,

on for 1s and then off for 1s).

FusionPower6000

Product Description

4 Product Overview

Issue 02 (2021-06-30)

Summary of Contents for FusionPower6000
































































Search results

Summary of Contents for FusionPower6000

Reviews:

Related manuals for FusionPower6000

Brands by name

Popular brands

Huawei FusionPower6000, Product Description

Search results

Summary of Contents for FusionPower6000

Reviews:

Related manuals for FusionPower6000

Brands by name

Popular brands