Huawei FusionPower6000 Product Description Download Page 9

Page: 9 / 63

●

The product can be delivered within a few days and quickly installed onsite,

effectively reducing costs.

Cost-Effectiveness and High Energy Efficiency

●

One pre-fab. module integrates the power distribution and monitoring

systems that are pre-installed and pre-commissioned before delivery. The pre-

fab. module goes through pre-commissioning and trial run before delivery.

Customers are welcome to check and try the product in the factory.

●

Mature delivery mode, modular structure, and low-cost transportation of the

pre-fab. module ensure fast deployment, and simple and convenient

expansion and upgrade.

Intelligent Management

●

Equipment is monitored in real time for efficient management.

●

The NetEco can be connected for unified management.

FusionPower6000

Product Description

2 Features

Issue 02 (2021-06-30)

Summary of Contents for FusionPower6000
































































Search results

Summary of Contents for FusionPower6000

Reviews:

Related manuals for FusionPower6000

Brands by name

Popular brands

Huawei FusionPower6000, Product Description

Search results

Summary of Contents for FusionPower6000

Reviews:

Related manuals for FusionPower6000

Brands by name

Popular brands