Huawei FusionModule2000 V500R003C10 Product Description Download Page 196

Page: 196 / 217

FusionModule2000 Smart Modular Data Center
Product Description

8 Intelligent Module Management System

Issue 06 (2020-05-21)

188

Item

Specification

Weight in full configuration (including
disks)

≤ 5 kg

Maximum power consumption (including
hard disks)

< 60 W

Dimensions (H x W x D)

43.6 mm (1 U) x 442 mm x 310 mm
(excluding the panel)

43.6 mm (1 U) x 442 mm x 320 mm
(including the panel)

8.3.9.3 VCN520

Figure 8-42

Appearance

Table 8-54

Performance Specifications

Item

Specification

Device access and video storage

Supports a maximum of 32 video access
channels or 320 Mbit/s video access
bandwidth.

Video forwarding

Supports a maximum of 128 video
forwarding channels or 320 Mbit/s video
forwarding bandwidth.

Video playback and download

Supports a maximum of 32 video playback
and download channels or 320 Mbit/s video
playback and download bandwidth.

Ingress and egress bandwidth

The ingress bandwidth does not exceed 320
Mbit/s.

The egress bandwidth does not exceed 320
Mbit/s.

NOTE



If cameras are connected through the GB/T
28181 or DHSDK protocol, both the ingress
bandwidth and egress bandwidth do not
exceed 256 Mbit/s.



In the cluster or external domain connection
scenario, the ingress bandwidth and egress
bandwidth of the master server do not exceed
256 Mbit/s separately.

Summary of Contents for FusionModule2000 V500R003C10


























































































































































































































Search results

Summary of Contents for FusionModule2000 V500R003C10

Reviews:

Related manuals for FusionModule2000 V500R003C10

Brands by name

Popular brands

Huawei FusionModule2000 V500R003C10, Product Description

Search results

Summary of Contents for FusionModule2000 V500R003C10

Reviews:

Related manuals for FusionModule2000 V500R003C10

Brands by name

Popular brands