9
Unfasten the waterproof screws from the installation position of mounting brackets.
6 Installing the Mounting Bracket
•
The cabinet is configured with mounting ears. Before installing the cabinet, remove the waterproof screws and install the
lifting eyes/mounting ears properly so as to carry the cabinet.
•
After installing the cabinet, remove the lifting eyes/mounting ears and install the waterproof screws.
Waterproof screw
Use the screws to fasten the nylon shims and mounting brackets.
Nylon shim
Screw
NOTE
• The mounting ears for 40 Ah and 20 Ah batteries are installed in the same way. This section uses the 20 Ah
batteries as an example.
• Reserved holes on the top of the cabinet are used to install mounting ears. Holes are reserved in the middle
of the cabinet. After the mounting ears are moved downwards, the mounting ears can be used as handles to
facilitate transfer. This section uses the installation in the middle of the cabinet as an example.
Mounting
bracket
