11
•
Hold the drill tight and keep the bit vertical to the wall. To avoid sloping holes, do not shake while drilling.
•
When the cabinet is fully configured (including the batteries), its weight can reach 156 kg. Therefore, consider
the weight-bearing capability of the wall when installing the cabinet. The cabinet can be installed only when
the wall is able to support the cabinet.
•
Ensure that sufficient heat dissipation space (50 mm) is reserved between the rear panel of the cabinet and
the wall if the cabinet is mounted on a wall.
7 Installing the cabinet on the Wall
7.2 Installing the Wall Mounting Fastening Parts
Place the marking-off plate on the wall and mark
installation holes by the marker pen.
When the cabinet with the 20 Ah battery compartment.
Unit : mm
When the cabinet without the battery compartment.
Top
Front
Bottom
Top
Front
Bottom
When the cabinet with the 40 Ah battery compartment.
Top
Front
Bottom
Drill holes (with the Ø16 bit ).
90°
The depth of the hole
should range from 52
mm to 60 mm.
