8
lp-642 Rev. 000 Rel. 002 Date 10.5.20
If the Secondary user’s email
address is already in the database
the fields will auto-populate with
the Secondary user’s account
information. See Figure 24.
Once populated, proceed to the
Assigning Access Levels section.
Figure 24 - HTPLink App Account Management Add Secondary User Screen - Auto-Populated
4. If the email address does not match
any in the database, the Primary user
has the option to retry (in case the
email was entered incorrectly the
first time), send an email invitation,
or cancel. See Figure 25.
Figure 25 - HTPLink App Account Management Send Invitation Screen
If the Secondary user has not set
up an account, the Primary may tap
“send invitation” to send an email to
the address entered in the email field.
Figure 26 - HTPLink App Account Management Invitation Sent Screen
5. The invitation email sent to the
Secondary user is shown in Figure
27. Clicking on the “Register your
account” link will bring the user
to the log in page to create an
account. See the “Creating a
User Account” instructions, this
document.
Figure 27 - HTPLink App Invitation Email