HTP 7450P-699 Instructions For Connecting And Configuring Download Page 16 | Manualshive

Page: 16 / 16

HTP 7450P-699 Instructions For Connecting And Configuring Download Page 16

16

lp-642 Rev. 000 Rel. 002 Date 10.5.20

Installer Menu

The Installer Menu allows the User to view and change all of the

appliance Installer Menu parameters.

NOTE: The User must have Read and Write access to save changes

to the system.

NOTE: If unfamiliar with the appliance or the specific installation,

it is highly advised not to make any changes to the Installer Menu

parameters.

NOTE: When making any changes reference the appliance

Installation Manual for Installer Menu parameter details, as the

Installer Menu differs from appliance to appliance.

Installer Menu - Outdoor Reset Curve

The Installer Menu - Outdoor Reset Curve screen offers sliders

to allow the User to easily set the curve. Move the sliders to set

the Central Heating shutdown temperature and the setpoints

at both the maximum and minimum outdoor temperatures and

the Outdoor Reset Curve is set.

NOTE: The User must have Read and Write access to save changes

to the system.

«
...
14
15
16

Summary of Contents for 7450P-699

















Reviews:

No comments