manualshive.com logo in svg

HTP 7450P-699, Instructions For Connecting And Configuring, Page: 13 / 16

Share
Download
HTP 7450P-699 Instructions For Connecting And Configuring Download Page 13

13

lp-642 Rev. 000 Rel. 002 Date 10.5.20

Home Screen

The Home Screen provides the User with key indicators 

of system function and performance. Flue, Supply, Del-

ta T, Return, outdoor, system, and indirect storage tem-

peratures, pump operation, and appliance status (with 

a color coded center pane) visuals allow the User to 

quickly determine whether the system needs attention.

Center Pane Color Code Details

Green Center Pane indicates appliance is Running or 

in Standby.

Yellow Center Pane indicates a Service Notification.

Orange Center Pane indicates a Blocking Code.

Red Center Pane indicates a Lockout Code.

Part 11 - Overview of HTP Link App Screens and Capabilities

History

History Screen 1 displays the current Internal and 

External temperatures, as well as information specific 

to the operation of the appliance, including Power On 

Hours, Total Ignition Attempts, and Maintenance Interval. 

This data can help reduce short-cycling and system 

imbalances. Tap NEXT to proceed to the next History 

Screen. Tap HOME to return to the Home Screen.

History Screen 2 displays the ten (10) most recent lock-

out faults and ten (10) most recent blocking codes, along 

with the date and time when they occurred. To the right 

there is a list of fault codes as well as their total amount 

of occurences. Internal temperatures are also provided for 

troubleshooting purposes. Tap PREVIOUS to return to the 

previous History Screen. Tap HOME to return to the Home 

Screen.

NOTE: This section is intended as an overview of the HTP Link app. See the appliance installation manual for full details of appliance installation, 

operation, troubleshooting, etc.

NOTE: These screens are “Read-only”. “Read/Write” screens feature additional buttons, including a “SAVE” button to save parameter changes.

Summary of Contents for 7450P-699

















Reviews:

No comments