Inserting the battery
1.
Take the bottom cover off.
2.
Open the battery compartment door.
3.
Insert the battery (with its exposed copper contacts first) into the battery
compartment.
Charging the battery
The battery is partially charged when shipped. Before you turn on and start using
HTC Acquire, it is recommended that you charge the battery. Some batteries perform
best after several full charge/discharge cycles.
§
The battery is already installed in HTC Acquire when shipped. A thin film is
inserted between the battery and the compartment. You need to remove this film
before you can charge the battery.
§
Only the power adapter and USB sync cable provided in the box must be used to
charge the battery.
§
Do not remove the battery from HTC Acquire while you are charging it using the
power or car adapter.
1.
Plug the power adapter into the USB connector.
2.
Plug in the power adapter to an electrical outlet to start charging the battery.
As the battery is being charged, the notification LED shows a solid orange light. The
light turns to solid green when the battery is fully charged.
13
Getting started
