manualshive.com logo in svg

HT PQA400, User Manual

Share
Download
HT PQA400 User Manual Download Page 87

 

 

PQA400 - PQA823 - PQA824 

 

 

 

 

EN - 86

5.5.2.2. Graph 
This screen (Fig. 145) contemporarily shows the saved instant values of the waveforms of 
voltages V1, V2, V3, Vn scaled according to the Full scale (Fs) and the relevant RMS 
values; these values have been saved by the instrument upon pressing the SAVE key. 
 

 

Fig. 145: Voltage scope in three-phase 4-wire system 

 
The following keys are active on this page: 

  The up (ZOOM+) or down (ZOOM-) arrow keys zoom in or out the displayed 

waveforms. 

 The 

F1 key (or the PAG item on the display) advances to the following page of 

saved current values. 

 The 

ESC key (or the smart icon   on the display) to exit the function and go back 

to the “Recording analysis” page (Fig. 143). 

 
This screen (Fig. 146) contemporarily shows the saved instant values of the waveforms of 
voltages V12, V23, V31 scaled according to the Full scale (Fs) and the relevant RMS 
values; these values have been saved by the instrument upon pressing the SAVE key. 
 

 

Fig. 146: Voltage scope in three-phase 3-wire system or Aron system 

 
The following keys are active on this page: 

  The up (ZOOM+) or down (ZOOM-) arrow keys zoom in or out the displayed 

waveforms. 

 The 

F1 key (or the PAG item on the display) advances to the following page of 

saved current values. 

 The 

ESC key (or the smart icon   on the display) to exit the function and go back 

to the “Recording analysis” page (Fig. 143). 

 

Shop for HT products online at:

1.877.766.5412

www.

PowerMeterStore

.com

Summary of Contents for PQA400

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands