manualshive.com logo in svg

HT PQA400, User Manual

Share
Download
HT PQA400 User Manual Download Page 8

 

 

PQA400 - PQA823 - PQA824 

 

 

 

 

EN - 7

3. PREPARE TO USE 

3.1. INITIAL 

CHECK 

This meter has been checked before shipment from an electrical and mechanical point of 
view. All possible precautions have been taken in order to deliver it in perfect condition. 
Notwithstanding, on receipt of the instrument we suggest that you check it summarily to 
make sure that no damage has occurred in transit. Should you find irregularities please 
contact the carrier immediately. 
Furthermore, please make sure that the parcel contains all the accessories and parts listed 
at enclosed packing list. In case of discrepancies please contact your dealer. Should it be 
necessary to return the instrument to the supplier please keep to the instructions given at 
chapter 11. 
 
3.2.  INSTRUMENT POWER SUPPLY 
The instrument can be powered only by a rechargeable Li-ION battery (3.7V, 1900mAh) 
which is included with the meter. Use only the external adapter standard supplied with 
meter for charging battery (see § 8.2 for more details). 

 

 

CAUTION 

 

For recordings use ALWAYS the external adapter (even the instrument 
allows the operator to perform a recording using internal battery). 

 

 

CAUTION 

 

Please perform a complete charging of internal battery for at least 5 
hours before the first use of meter. 

 
The meter uses the below options to increase the battery duration: 

 

  Automatically reduction of display brightness after about 30s from last operation 

performed with meter, with external adapter not connected. 

  Auto Power OFF feature after about 5 minutes from the last operation on function keys 

or display touch screen with external adapter not connected (see § 5.1.6). 
 

3.3. CALIBRATION 
The instrument complies with the standards mentioned in this manual. Its performance is 
defined for 12 months from the purchase date. 
 
3.4. STORAGE 
To guarantee accurate measurements, after a long storage period in severe environmental 
conditions wait until the instrument resumes its normal conditions (see environmental 
conditions listed at § 9.3.1). 

Shop for HT products online at:

1.877.766.5412

www.

PowerMeterStore

.com

Summary of Contents for PQA400

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands