manualshive.com logo in svg

HT PQA400, User Manual

Share
Download
HT PQA400 User Manual Download Page 42

 

 

PQA400 - PQA823 - PQA824 

 

 

 

 

EN - 41

5.3.1.1.  Setting system frequency 
 
1.  Move the cursor using arrows keys on field relative to “Freq[Hz]”, marked with blue 

background. 

2. Use F3 or F4 keys (alternatively touch MOD(+) o MOD(-)) to select the system 

frequency choosing between 50Hz or 60Hz options. This parameter is relevant ONLY if 
the input voltage not permits to recognize the frequency value (for example, only the 
clamps for the current measurement are connected). In this case the instrument 
generates an internal synchronism equal to the value of the set frequency. 

3. Press SAVE or ENTER keys (or the smart icon 

) to save the selected option and 

confirm by “Ok”. This selected parameter will be present also after turn off the meter. 

4. Press ESC key (or the smart icon  ) to quit without saving any modification. 
 
5.3.1.2.  Setting clamp type 
 
This parameter must be always set equal to the clamp type used. 
Two types of clamps are available: 

  STD: 

For Standard clamps or Current Transformer. 

  FLEX: 

For Flexible clamps. 

1.  Move the cursor using arrows keys on field relative to “Clamp Type”, marked with blue 

background. 

2. Use F3 or F4 keys (alternatively touch MOD(+) o MOD(-)) to select clamp type 

choosing between STD or FLEX options. 

3. Press SAVE or ENTER keys (or the smart icon 

) to save the selected option and 

confirm by “Ok”. This selected parameter will be present also after turn off the meter. 

4. Pressing ESC key (or the smart icon  ) to quit without saving any modification. 
 
5.3.1.3.  Setting full scale of clamps 
 
The value of this parameter must be always equal to the full scale of the current 
clamps used to take the measurement. In case multi-scale clamps are used, the value of 
this parameter must be equal to the scale selected on the clamps. 
 
1.  Move the cursor using arrows keys on field relative to “Clamps FS [A]” , marked it with 

blue background. 

2. Use F3 or F4 keys (alternatively touch MOD(+) o MOD(-)) to select the desired full 

scale. In case of STD clamps any value can be set by using F3 or F4 keys (alternatively 
touch  MOD(+) o MOD(-)). In case of FLEX clamp only 300A or 3000A options are 
possible. 

3. Press SAVE or ENTER keys (or the smart icon 

) to save the selected option and 

confirm by “Ok”. This selected parameter will be present also after turning off the meter. 

4. Pressing ESC key (or the smart icon  ) to quit without saving any modification. 
 

Shop for HT products online at:

1.877.766.5412

www.

PowerMeterStore

.com

Summary of Contents for PQA400

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands