manualshive.com logo in svg

HT PQA400, User Manual

Share
Download
HT PQA400 User Manual Download Page 13

 

 

PQA400 - PQA823 - PQA824 

 

 

 

 

EN - 12

5.1.  GENERAL SETTINGS  

 

 

Fig. 8: MENU GENERAL screen - General settings section 

This section permits to set the below control parameters: 

 

System language. 

 

System Date/Hour. 

 

Display brightness. 

 

Protection password during recordings. 

 

Key sound on pressure. 

 

Auto Power OFF Enable/Disable. 

 

Memory type settings (not available for PQA400). 

 
Pressing ENTER key (or touch the relative icon at display). The below screen is shown by 
meter: 
 
 

 

Fig. 9: General Settings screen 

 
5.1.1. Language 

selection 

1.  Move the cursor using arrows keys on field relative to “Language”, marked with blue 

background. 

2. Using F3 or F4 keys (or touch MOD(+) o MOD(-)) for selection of language choosing 

among the different options. 

3. Pressing SAVE or ENTER keys (or the smart icon 

) to save the selected option and 

confirm by “Ok”. This selected parameter will be present also the turning off of meter. 

4. Pressing ESC key (or the smart icon  ) to exit by screen without saving any modify. 
 
 
 

Shop for HT products online at:

1.877.766.5412

www.

PowerMeterStore

.com

Summary of Contents for PQA400

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands