HT9023
EN - 42
2. Press
F1
(
Mod
) to open the drop-down menu shown on the
screen aside and select the “
Resistance
” option with the
same key
3. Press
F4
(
OK
) to confirm.
The instrument goes into
resistance measurement mode
Mod
Fnc OK
>
30.0 k
Ω
17/01 – 18:34:23
4. Connect red cable to the input lead
V
and black cable to the input lead
COM
, then
connect the instrument (see Fig. 14 – left part)
5. The screen shows an example of Resistance measurement.
Mod Fnc
100.0
Ω
17/01 – 18:34:23
6. Press
F1
(
Mod
) to open the drop-down menu shown on the
screen aside and select the “
Continuity
” option with the
same key
7. Press
F4
(
OK
) to confirm. The instrument changes into
Continuity test mode and the following screen is displayed.
For information on setting of maximum limit on the continuity
test, refer to § 4.4.4
Mod
Fnc OK
>
30.0 k
Ω
17/01 – 18:34:23
8. While measuring Resistance or Continuity, press
F2
(
Fnc
) to
open the drop-down menu shown on the screen aside. At
each subsequent pressure of
F2
, the cursor will scroll
through the available items, as follows:
Max
: it constantly displays the maximum resistance value
measured
Min
: it constantly displays the minimum resistance value
measured
RST
: (RESET) it deletes all stored Max, Min values and
re-start with a new measure
Esc
: it goes back to a normal measuring mode
Mod
Fnc
OK
50.0 k
Ω
17/01 – 18:34:23
9. Pressing
F4
(
OK
), the selected item is confirmed. Nearby, an
example of measurement with active Max function. The
display shows the active function.
Mod Fnc
M a x
50.0 k
Ω
17/01 – 18:34:23
10. For the use of HOLD and backlight features see § 4.4
Resistance
Continuity
Help
Resistance
Continuity
Help
Max
Min
RST
Esc