![background image](http://html1.mh-extra.com/html/ht/ht9023/ht9023_user-manual_2178111033.webp)
HT9023
EN - 32
2. Press
F1
(
Mod
) to open the drop-down menu shown on the
screen aside and select the “
DC
” option with the same key
3. Press
F4
(
OK
) to confirm.
The instrument goes into DC
current measurement mode
Mod
Par Fnc OK
A C < 4 2 . 5 H z
- - - -
k W
- - - -
k V a r i
- - - -
k V A
17/01 – 18:34:23
4.
Select the "
Zro
" option to reset the values on the display by
deleting the residual magnetization on the DC current.
Select the "
Online
" option to activate the real-time display of
the parameters with WiFi connection of the instrument to a
PC and TopView software or with connection to mobile
devices via the HTAnalysis APP (see § 6.2)
Mod Par Fnc
D C
0 . 0 0
k W
17/01 – 18:34:23
5. Connect red cable to input lead
V
and black cable to input lead
COM
. Position red
lead to “+” and black lead to “-” then connect “+” cable to the clamp jaws, respecting
the direction of current indicated by the arrow (see Fig. 12). Connect the cable to the
middle of the clamp jaws, in order to get accurate measurements. Use the marks as a
reference (see Fig. 2)
6. The value of DC power is displayed expressed in kW. Press
F2
(
Par
) to open the drop-down menu shown on the screen
aside and select the “
Volt/Curr
” option for the DC voltage
and current measurement. Confirm with
F4
(
OK
). The
following screen is displayed:
Mod
Par
Fnc OK
D C
1 . 6 0
k W
17/01 – 18:34:23
7. The screen shows an example of DC Voltage and Current
measurements.
Mod Par Fnc
D C
8 0 . 0
V
2 0 . 0
A
17/01 – 18:34:23
AC+DC 1P
AC+DC 3P
DC
Online
Help
Zro
Esc
Power
Volt/Curr
Energy