![background image](http://html1.mh-extra.com/html/ht/hn002055/hn002055_user-manual_2178082027.webp)
HT2055
EN - 26
Measurement structure
No.: 1
Number of measurements associated to the selected location
No.: 1 [13]
Number of measurements in the selected location
[Number of measures in the selected location and sub-locations]
> No.: 7/7
Number of selected test / Number of all results saved in the
selected location
STEP VOLT
Type of measurement saved in the selected location
8.1 SAVING
RESULTS
At the end of a measurement test the result and the parameters can be saved into memory
(the icon
is shown in the bottom part of display). For saving result follow the following
steps:
1 Press
MEM
key on the meter. The herewith screen is displayed:
Fig. 31: Saving results inside memory
2 The “FREE“ message means the percentage value of memory still available for saving
operation
3 Use
the
or
keys to select the type of location (Object / Loc1 / Loc2) and the
or
to decrease or increase the numerical marker associated to the location (range 1 ÷
199)
4 Press again
MEM
key to complete the saving of data or the
ESC
key to exit without
saving
8.2 RECALL RESULT AT DISPLAY
The recall of result at display can be performed in the following equivalent ways:
By pressing
MEM
key in any measurement screen of the meter
Selecting the item “MEMORY
RECALL RESULTS” in settings menu (see § 5.1)
Fig. 32: Recall results at display
1 Use
the
or
keys to select the type of location (Object / Loc1 / Loc2) and the
or
to decrease or increase the numerical marker associated to the location (range 1 ÷
199)
2 Press
TEST
key to select the number of the desired measurement
3 Press
again
TEST
key for recall at display the result of desired measurement