![background image](http://html1.mh-extra.com/html/ht/hn002055/hn002055_user-manual_2178082030.webp)
HT2055
EN - 29
8. Select the “
Config
COM Port…
” command and click on the “AutoFind” button to
start the automatic detection of the instrument (see Fig. 37)
Fig. 37: Connection of the instrument to PC
9. The herewith message means a correct detection of meter by the PC
Fig. 38: Correct detection of instrument
10. In case of meter detection failure by the PC it should be necessary to re-configure the
“virtual” COM serial port associated with the USB driver previously installed. The
TeraView program can detect automatically serial ports from
COM1
to
COM22
. Follow
the following steps to modify the COM associated to USB driver:
Right click of mouse on the “
My computer
” icon on the PC desktop and selection of
“Properties” item
“Hardware” folder
“Device Manager”
“Ports (COM & LPT)
Move on the “USB CDC Serial Port Emulation (COMxx)” item
right click
“Properties”
Select “Port Settings”
“Advanced…”
In the COM Port Number list select a “COMxx” among COM1 and COM22
Confirm all operations, come back to software TeraView and repeat the AutoFind
For any information about the use of TeraView software refer to the help on line of
the program