11/2012
SP 4040
39
SP 4040
5.3.4.1 Check, that the feeding belt runs straight
Switch on the shredder and let it run for 10 minutes.
During this time, the feeding belt must run in the middle of the snub roller. If it slips to the left
or right edge, you must alter the setting of the snub roller
5.3.4.2 Checking the feeding belt for wear
The surface of the feeding belt can become worn after long periods of use. If you can see
the fabric inlay in the belt, it must be replaced. Please notify our customer service.
6 Disposal
instructions
HSM baling presses / shredders have a long service life. Nevertheless, every machine
reaches a time when inspections and repairs are no longer worth the trouble. The opera-
tor then faces the problem of disposing of the machine properly.
We will be glad to advise you about the legal regulations for disposal at the
appropriate time.
The baling press and shredder are made of different materials and need to be disassem-
bled to separate the materials for recycling. (Ferrous materials, electrical components,
plastics)
The hydraulic tank, pipes and hoses must be drained. It is important to ensure that
leaking or spilled liquids are disposed of using appropriate binding agents or technical
facilities, and do not enter the water, the ground or the sewer system.
In disposing of the respective hydraulic fl uids, the national legal requirements must be
observed.
