11/2012
SP 4040
21
SP 4040
Main switch (1)
When turned 90° clockwise, the main switch is on.
The main switch can be locked in the "Off" position with a padlock.
"Automatic operation" soft-key (2)
When this soft-key is pressed, the press ram is switched into automatic operation. By re-
pressing this key, automatic operation is deleted. Automatic operation is the precondition
for the function of the shredder.
Screen display: Automatic operation
in starting position
Light symbol "Automatic operation" (3)
This yellow symbol lights up when the automatic operation is switched on.
Screen display: Automatic operation
in starting position
Light symbol "Standby" (4)
This green light symbol lights up when the main switch is switched on and under power.
Screen display: Manual operation
in starting position
The light symbol is fl ashing, as long as the door of the baling press is open.
Screen display: Manual operation
Door/Loading fl ap open
The light symbol is fl ashing in set-up mode resp. at the message "Bale fi nished".
"Raise press ram" soft-key (5)
When this soft-key is pressed, the press ram returns into its upper end position with the
door closed.
Screen display: Raise press ram
"Press ram stop" soft-key (6)
With this soft-key the press ram can be stopped in any position.
Screen display: Press ram not in starting position
The movement can be continued by pressing the "Raise/lower press ram" soft-key.
"Lower press ram" soft-key (7)
Pressing this soft-key while the door is closed starts the compression. The press ram
moves down and compresses the material.The press ram automatically returns into its
upper end position after expiry of the pressing time.
Screen display: Lower press ram
