11/2012
SP 4040
27
SP 4040
3.4 Operation
The press is now ready for operation if:
•
The main switch on the press is on
•
The bale removal door is shut
•
No error message is present
•
Screen display: Manual operation - in starting position
The shredder is now ready for operation if:
•
The mains plug for the shredder is plugged into the control cabinet of the baling press
•
The "Emergency stop" button is unlocked
•
The green symbol is glowing
- Press the green arrow key (=start key)
- Place the material to be shredded on the loading table and then place batches on the
infeed conveyor
If material that is not supposed to be shredded is mistakenly placed onto the conveyor
belt do not try to pull it out, but
- First press the "Stop" key and then press the reverse key after the shredder has
come to a standstill
• The shredder is now running in reverse
- When the reverse key is released the shredder comes to a stand still
- The material can now be removed from the conveyor belt and the shredder can be
started again with the start key
The shredded material falls through the discharge chute of the shredder directly into the
carton box inside the press.
The press cycle is initiated by the infrared light barrier when the carton box has been
fi lled to a certain level. The press ram moves downwards, presses the material into the
carton box, (alternatively: into the plastic bag) switches over automatically and moves
back to its starting position.
The shredder continues to run during the press cycle.
The fi lling and press cycle continues until the "Bale fi nished" light symbol appears on the
display and the blue light symbol "Bale fi nished" lights up.
At the same time the shredder switches off. The shredder can now only be operated in
reverse direction.
The press ram moves to its upper end position. As soon as this position is reached, the
motor of the press is switched off and the light symbol "Automatic" goes off. The "Bale
fi nished" light symbol disappears as soon as the bale removal door is opened.
-
Press the
"Automatic key"
on the balling press
Screen display: Automatic
in starting position
