28
SP 4040
11/2012
SP 4040
3.4.1 Repressing
-
Acknowledge the "Bale fi nished" message with the "Stop" key
•
the message disappears
-
Press the "Press ram down" key
•
The press ram moves down onto the material, switches over automatically and
moves back to its upper end position
•
The yellow "Bales ready" lamp lights up again
Note
In order to achieve an optimum compression of the material, it may be
necessary to repeat the press cycle 1-2 times.
FA 400
-
Open the bale removal door (5)
-
Take the special trolley (13) and push it under the carton box (not necessary when
using the plastic bag)
-
Remove the bale from the press and carry it away (resp. pull out the plastic bag and
carry it away)
5
13
