08/2013
Powerline FA 400.2
7
FA 400.2
Ready for operation
Green LED
Waste bag full
Red LED
Start button
The shredder switches on.
The feed belt moves in the intake
direction.
Stop button
The cutting block and feed belt stop.
The shredder is in standby mode.
Reverse button
The cutting block and feed belt run in
reverse.
Paper jam or overload
Red LED
Door open
Red LED
Switching on the shredder
• Unlock the emergency stop button by turn-
ing it anticlockwise.
• Solo-version: Turn the main switch to the
I
position.
Combination-version: Turn the main switch
on the baling press to the I position.
The green "Ready for operation" LED
lights up.
Note:
There is a safety switch on the front door
of the shredder. The machine can only be
switched on when the door is shut.
• Press the green start button.
The cutting block and feed belt start up.
Caution!
The feed belt can run in reverse if the phase
wires in the power plug are incorrectly con-
nected.
Turn off the main switch immediately and
pull out the power plug!
Have an electrician change two of the three
phase wires
7 Start-up
6 Operating and display elements
Inspecting the safety devices
Check that the safety devices are working
properly:
• At the start of each shift
• After any maintenance or repair work
Do not start the machine until you have checked the safe-
ty devices and found them to be in perfect working order.
If any defect arises during operation stop the machine
immediately and make sure it is corrected.
http://www.monomachines.com/
http://www.monomachines.com/
