HSD ES327, Assembly Instructions Manual

Page: 44 / 122

3 Transport, packing, unpacking, storage
44
HSD S.p.A. © - 0103h03a.fm100713
The examples shown are for information purposes only, in that it is not possible for the
manufacturer to determine all the possible configurations for lifting its products beforehand.
Furthermore, it is necessary that during transport the following environmental conditions are observed:
3.4 Unpacking
If the product is delivered in a wooden case, insert a screwdriver under the fastener. Use the
screwdriver as a lever, taking care not to damage the case or its contents.
If the product is packed in a cardboard box, remove the strips of adhesive tape, taking care not to
damage the box or its contents.
Transport temperature -25

C ÷ +60

C (-13

F ÷ +140

F)
Non condensing relative humidity 5% ÷ 55%
Prior to opening the packing, make sure that the seals are still intact.
Do not lift the product by grasping the electric fan as this could damage the
guard.
The expanded foam and plastic wrapping must be disposed of as plastic material.