HS-Technik TorqBee TBASL-10-2 Operating Instructions Manual Download

Page: 4 / 36

- 4 -

1 Operating principles

Dear customers,

thank you for choosing a HS-Technik GmbH product.

This quality product „Made in Germany“ fulfils the highest requirements with regard to

performance, quality and accuracy. When used correctly the product will undoubtedly

perform very well for many years.

These operating instructions contain information on safety and for the operation of the

tool. In addition it contains information on the dimensions and technical data. We would

be happy to assist you with additional information or to answer your questions. Our

technical support and our technicians would be happy to assist you.

1.1 Scope of delivery

•

Battery tightening tool

•

USB Cable (Type A on Mini B)

•

Operating instructions

1.2 General information

Read the operating instructions before initial operation.

Please pay particular attention

to Chapter 2 „General safety informations“.

This operating instruction should make it easier for the operator to get to know the tool

and to use it for its intended purpose. The operating instructions include important

information related to the safe and proper operation of the tool. Compliance with these

instructions helps you to:

•

Avoid hazards

•

Avoid repair costs and downtimes

•

Increase the reliability and the lifespan of the product.

Summary of Contents for TorqBee TBASL-10-2





































Search results

Summary of Contents for TorqBee TBASL-10-2

Reviews:

Related manuals for TorqBee TBASL-10-2

Brands by name

Popular brands

HS-Technik TorqBee TBASL-10-2, Operating Instructions Manual

Search results

Summary of Contents for TorqBee TBASL-10-2

Reviews:

Related manuals for TorqBee TBASL-10-2

Brands by name

Popular brands