- 26 -
4.2.8 Setting the tightening torque
The tightening torque is set using a mechanical shut-off clutch.
•
To adjust the clutch, the clutch cover must first be rotated to
the open position.
•
When the clutch is visible bring the clutch into the setting posi
-
tion, e.g. by turning the output or quickly starting up the tool.
•
The clutch can now be set using a setting tool.
Counter clockwise: weaker
Clockwise: stronger
•
After adjustment, slide the cover back over the clutch opening.
•
Now the torque must be determined using a suitable torque
gauge. If the desired value was not reached the clutch must be
readjusted.
DANGER
Risk of injury from protruding objects.
Objects which are placed in the opening can be ejected during operation.
•
The clutch must has to be closed prior to operation.
•
Ensure that there are not objects in the opening.
Clutch adjustment
Rotate the cover
Summary of Contents for TorqBee TBASL-10-2
Page 34: ... 34 Notes ...
Page 35: ... 35 Notes ...
