Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: [email protected] – Web: www.hs-technik.com
- 74 -
Releasing the trigger during a screwing process is
permitted. Trigger was released during the screwing
process. The screwing process can continue. When
using the barcode scanner, if there is "NO NUMBER", the
corresponding barcode appears on the blue display
element as a release.
After confi rming the NOK ("CONFIRM OK" display), the
screw must fi rst be unscrewed prior to the next release.
Releasing the trigger during an unscrewing
process is permitted. Trigger was released during the
unscrewing process. The unscrewing process can
continue. When using the barcode scanner, if
there is "NO NUMBER", the corresponding barcode
appears on the blue display element as a release.
Screwing process is running
When using the barcode scanner, if there is
"NO NUMBER", the corresponding barcode appears on
the blue display element as a release.
Unscrewing process is running
When using the barcode scanner, if there is
"NO NUMBER", the corresponding barcode appears on
the blue display element as a release.
Status displays
The rotational direction switch is reversed; unscrewing is
not required, instead a program for a screwing process
is active. Upstream NOK screw joint was not confi rmed.
Summary of Contents for PROG-3
Page 82: ...www hs technik com ...
Page 83: ...www hs technik com ...
