Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: [email protected] – Web: www.hs-technik.com
- 60 -
4. COMMISSIONING
Do not let the tool fall or allow other objects to fall on the device. Protect
it from impact damage. Make sure that the device does not come into
contact with sprayed water or oil.
4.1.0. INSTALLING OR
REMOVING THE BATTERY
•
To remove the battery, set the
rotational direction switch to the
center position, slide the clip on
the front side of the battery back
and pull it forward away from the
machine.
•
To install the battery, align the
tongue of the battery
with the
groove in the casing so it can easily
slide into place.
• Always slide it on completely until
it locks with a click. Check that
the battery is correctly locked in
place before starting to work.
If the battery is not installed properly,
it can fall out of the tool and lead to
injuries.
•
Never use force when installing
the
battery. If the battery cannot
be easily slide in, it has not been
correctly installed.
1 – Clip
2 – Remove battery
2
1
Summary of Contents for PROG-3
Page 82: ...www hs technik com ...
Page 83: ...www hs technik com ...
