Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: [email protected] – Web: www.hs-technik.com
- 57 -
a) Only charge the batteries in chargers recommended by the
manufacturer.
If the battery is not charged on a suitable charger, it can be
permanently damaged.
b) Only use the provided battery for power tools.
The use of other batteries can lead to injuries and fi re hazards.
c) If the battery is not used for a longer period of time, it must not remain
on the charger or on the tool.
If a work break of more than 3 hours is expected, the battery must
be removed from the tool. Otherwise, the battery may be permanently
damaged.
d) The lithium-ion battery should not remain on the charger for longer
than 36 hours for safety reasons.
Remove the battery from the charger immediately after the charging
process is completed.
e) An empty battery should not be in contact with the tool or a
charger that is disconnected from the mains for a longer period of
time
.
In both cases, currents are fl owing that
deep discharge the battery
and can permanently damage it.
f) Recharge the lithium-ion batteries immediately and never store them
when empty.
If the battery is stored while disconnected from the tool and the
charger , it will maintain a constant capacity over a long period of
time. (Loss approx. 5% per year)
g) Always transport the battery separately from the tool.
You thus prevent accidentally switching on the tool and deep
discharging the battery.
h) Do not subject the lithium-ion battery to high temperatures
(+ 50°C) or direct sunlight.
If the battery gets warmer than 50°C during operation (charging or
discharging), it must be removed from the charger or tool immediately.
Summary of Contents for PROG-3
Page 82: ...www hs technik com ...
Page 83: ...www hs technik com ...
