Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: [email protected] – Web: www.hs-technik.com
- 55 -
c) Remove the battery before you change tool settings, replace
accessories or lay the tool down.
This safety measure prevents the power tool from starting
unintentionally.
d) Store unused tools out of reach of children.
Do not allow persons to use the device who are not familiar with it
or have not read these instructions. Power tools are dangerous if they
are used by inexperienced persons.
e) Take good care of the power tool.
Check that moving parts work properly and do not jam, that there are
no broken or damaged parts and that the functionality is not hindered.
Have damaged parts repaired prior to using the device.
Many accidents are caused by poorly maintained power tools.
f) Keep the tools clean.
Carefully maintained tools jam less often and are easier to use.
g) Use the tool, accessories, etc. in accordance with these instructions.
Take the working conditions and task to be executed into account. The
use of power tools for other purposes than the intended use can lead
to hazardous situations.
h) Use the right tool
Do not use low-output tools for heavy loads. Do not use the tool for
purposes and work for which it is not intended.
i) Check your tool for damage
Prior to further use of the tool, the safety equipment or damaged parts
must be inspected to ensure proper functionality.
Check to ensure the functionality of moving parts, that they don't jam,
that no parts are broken and that all parts are properly and correctly
installed and all conditions required for the operation of the device
have been fulfi lled.
Damaged safety equipment and parts should be properly repaired or
replaced by a customer service workshop unless otherwise indicated
in the operating instructions. Damaged switches must be replaced by a
customer service workshop. Do not use tools on which the trigger
cannot be easily switched on and off.
Summary of Contents for PROG-3
Page 82: ...www hs technik com ...
Page 83: ...www hs technik com ...
