HS Automatic ApS
Side 38 af 41
17-11-2005
HSAjet-CU user manual
Last saved
Fejl! Ukendt argument for parameter.
Complete remote connection reference
As previously mentioned, the CU remote commands is based on a dialog protocol, where you send
commands and receive response back from the CU. Each command and response is always
separated by "#".
It may be helpful to know that the CU objects are grouped into numeric types, and then again by
numbers. For example for counters (object type 1), you may have objects 1;1 1;2 and 1;3 for the
3 counters in your message. Additionally, objects have a descriptive name which you can read
from the unit but use to address objects.
COMMAND
CMD:<parameters>#
Command is used to make the unit do something basic
Parameters
Description
Response
S
Stop print mode
RES:0#
R
Start print mode
RES:0#
F;<filename>
Load file (max 8 upper case chars). File must be present
on the compact flash card.
RES:0#
D
Disconnect (PC network only)
RES:0#
U
Update next print buffer
RES:0#
C;<password>
Remote Connect with password (PC network only)
RES:10#
REQUEST
REQ:<parameters>#
Request is used to get information about the message currently loaded.
Parameters
Description
Response
object list
Read objects list
DAT:<object type>;<object
nr>;<object name>#(all)RES:0#
dir
Read CU files list
DAT:<filename1>#
DAT:<filename2>...(all)RES:0#
object
data;<object
type>;<object
nr>
Read data of specific object.
See OBJECT DATA RESPONSE
parameters
Read CU device parameters
See PARAMETERS RESPONSE
status
Read CU device status
See STATUS RESPONSE
device name
Read device name
DAT:device name;<device
name>#RES:0#
version
Read version information
DAT:<release>;<upver.>;<fpgaver.>;
<enetver.>#RES:0#
wait next
Return response when next print is started. Used as
interrupt for next print.
RES:0#
<object type> : 0 = Text, 1 = Counter, 2 = Time, 3 = Date, 4 = Barcode, 5 = Logo object.