HS Automatic HSAjet-CU User Manual Download Page 17 | Manualshive

Page: 17 / 43

HS Automatic HSAjet-CU User Manual Download Page 17

HS Automatic ApS

Side 16 af 41

17-11-2005

HSAjet-CU user manual

Last saved

Fejl! Ukendt argument for parameter.

Preventing object editing

Sometimes it is necessary to prevent objects in the CU from being edited. This is possible by
locking the object in OBJ INKdraw before you compile the CU file.

To lock objects,

right-click

the object in the object list and select "Locked". Now you can no longer

select the object in OBJ INKdraw canvas, and you can not edit in the CU.

One exception is when the password to protect parameter menu has been set. Then you can use
the same password to edit locked objects. Unlocked objects can always be edited.

Input pictures for object types

Text

String, max 80 characters
Scroll using up/down. Input of special characters possible.

Date

Numbers, from an input mask.
The input mask is selected in OBJ INKdraw.
You do not need to enter separation characters.
Ex:

14

-

04

-

2005

Counter

Current value, entered as a decimal value. The number of digits can not be
changed.
Ex: 0000000

Barcode

Depending on the variable content.

Logo

Only visibility on/ off is possible

«
...
15
16
17
18
19
...
»

Summary of Contents for HSAjet-CU












































Reviews:

No comments