5
Step 1.
One EXR Horizontal Support Assembly is designated as the top-level of
the audio stand and has threaded EXR Caps bonded into the four EXR Frame
Mounts. Place it upside-down on your work surface so the threads of the installed
caps face up, and the front face with HRS logo faces away from you (photo 1).
Photo 1
Steps 2-5 describe how to add a second level (and any subsequent levels) to your
EXR Audio Stand System. If you are constructing a 1V model EXR (i.e., a single-
level stand), proceed immediately to step 6. (Note that assembly photos going
forward show a two-level audio stand system, but that all written instructions apply
to any size stand thanks to the modular design of the EXR.)
Step 2.
Place a polymer ring around the threads protruding through each Frame
Mount (photo 2). The polymer ring should sit completely flat inside the Frame
Mount. Apply a few drops of the provided WD-40 3-in-1 oil to the end of each
thread.
Photo 2