10
Loading Components into the EXR Audio Stand System -
Carefully load each
component from the front of the EXR Audio Stand. Be careful not to hit any part
of the shelves or isolation bases. If you are utilizing isolation bases in your EXR,
make sure that none of the isolation bases are overloaded. By placing one or two
fingers on the bottom of the EXR Horizontal Support Assembly, and your thumb
on the top of the isolation base, you should be able to move the top of the isolation
base slightly (at all four corners) by squeezing your fingers together. If there is no
compliance, verify the load range of the isolation base is correctly matched with
the component. Please consult with your authorized Harmonic Resolution Systems
dealer or contact Harmonic Resolution Systems if you need assistance. The
isolation base load range can be easily modified by sending it to Harmonic
Resolution Systems or an authorized dealer to have the primary isolation stage
rebuilt.
The maximum load capacity of each shelf of the EXR Audio Stand System is 250
pounds (113 kg). Never load more than 250 pounds onto a single shelf of the EXR,
and never exceed a total load of 1000 pounds (453 kg) for the full system.
Modifying or expanding your EXR Audio Stand System -
Please contact HRS
or your local certified dealer if you would like to modify your EXR. Thanks to the
modular design of the EXR, expanding your system by adding shelves or even
splitting into multiple stands can be done in your own home with parts available
from HRS. Simply remove all components from your EXR, and turn it upside-down
on a work surface prepared the same as for the original assembly process. Remove
the EXR points and washers by hand, and use the custom nylon wrench to remove
the EXR locking nuts. After that, EXR Horizontal Support Assemblies and struts
can be added, removed, and interchanged freely. Make sure to install and tighten
all parts according to the original assembly instructions in this manual.