HQ Power VDP250MGD2, User Manual

Page: 4 / 27

VDP250MGD2 VELLEMAN 4
•
Use an appropriate safety cable to fix the device (e.g. VDLSC7 or VDLSC8 ).
•
Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
•
Use the original packaging if the device is to be transported.
•
All modifications of the device are forbidden for safety reasons.
•
Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
crash, etc. Using the device in an unauthorised way will void the warranty.
4. Description
1. LED display
2. Microphone
3. Safety cable attachment
4. DMX input
5. Power socket
6. DMX output
The LED display:
1. ENTER
2. Function DOWN
3. Function UP
4. NO
5. YES
5. Installation
a) Lamps
•
Only fit or replace a lamp when the device is unplugged from the mains.
•
Let a lamp cool down before replacing it as the temperature of a lamp can reach 700°C during operation.
•
When handling a halogen lamp, do not touch it with your bare hands. Use a cloth to insert or remove it.
•
Do not install lamps with a higher wattage than what this device was designed for.
•
Replace any deformed or damaged lamp with a lamp of the same type (see “ Technical Specifications ”):
1. Unscrew the 2 screws on top of the device.
2. Remove the lid.
3. Remove the old lamp from the socket and insert a new one.
4. Carefully replace the lid and fix it with the screws.
Remark: Do not use the device when the cover is open.
b) Fuse
•
Only fit or replace a fuse when the device is unplugged from the mains.
•
If the lamp burns out, chances are you will need to replace the fuse as well.
•
Replace a blown fuse with a fuse of the same type and rating (see “ Technical Specifications ”):
1. Remove the fuse holder under the power socket at the back of the device.
2. Remove the old fuse and install a new one.
3. Replace the fuse holder.