F
F
L
L
I
I
G
G
H
H
T
T
M
M
A
A
N
N
U
U
A
A
L
L
Document No.:G304MS/AFM
Date of Issue: 07/14
4-11
Approved
4.5.3 Launch/engine starting, run up, taxying procedures
Extending the powerplant, engine starting
WARNING
Do not crank the hot engine by hand, the serious injury may
occur!
1. Wheel brake
- Apply
2. Fire valve
- OPEN
3. Engine Main Switch
- ON
4. Engine Unit switch
- ON (green LED lights in the
retracted position)
5. Powerplant extend
switch
- UP (green LED lights in the
extended position)
6. Prop Stop lever
- Full forward
7. Ignition switch
- ON
8. Throttle lever
- ¼ open
9. Primer
- Actuate 3 times (by squeezing
rubber bulb if engine is cold)
10. Space around propeller - Check free
11. Control stick
- Fully back(tail wheel down)
12. Starter button
- Depress until engine has definitely
fired
13. Engine parameters
- Check
NOTE
Release starter button as soon as engine has definitely fired and
adjust throttle such that engine runs smoothly.
Should engine die after first ignition – p
rime only once and leave
Throttle lever ¼ open.
Should – after repeated starting attempts –
the engine be flooded, open throttle fully and try again.
Should the engine fail to start, clean spark plugs.