Cross Trainer XTR2
2
Assembly and Usage
Before You Begin
1. Locate a comfortable work site. Assemble your XTR2 Elliptical Cross-Trainer in an open space with
adequate ventilation and lighting. Because the XTR2 is portable to some extent, you need not assemble it
exactly where it is to be used. For your convenience, however, you should avoid hauling the machine across
excessive distances, through narrow passageways or over staircases once its assembly is complete. If the
XTR2 is to be assembled in a living quarters, protect the floor or carpet with a large mat before removing
parts from the carton.
2. Find your tools. You will need the following tools to assemble the XTR2
−
Ruler
−
Adjustable Wrench
−
Standard Screwdriver
−
WD40 lubricant or Vaseline (if necessary)
3. Review all safety guidelines of this manual.
Identify Your Hardware
4. Organise your nuts and bolts before assembly. Nuts are identified by the diameter of their cavities. For
more information, refer to exploded view diagram and parts list of this manual.
