HPE SN3000B Hardware Reference Manual Download Page 75 | Manualshive

Page: 75 / 95

background image

Support and other resources

Accessing Hewlett Packard Enterprise Support

• For live assistance, go to the Contact Hewlett Packard Enterprise Worldwide website:

www.hpe.com/assistance

• To access documentation and support services, go to the Hewlett Packard Enterprise Support Center

website:

www.hpe.com/support/hpesc

Information to collect

• Technical support registration number (if applicable)
• Product name, model or version, and serial number
• Operating system name and version
• Firmware version
• Error messages
• Product-specific reports and logs
• Add-on products or components
• Third-party products or components

Accessing updates

• Some software products provide a mechanism for accessing software updates through the product

interface. Review your product documentation to identify the recommended software update method.

• To download product updates, go to either of the following:

◦ Hewlett Packard Enterprise Support Center

Get connected with updates

page:

www.hpe.com/support/e-updates

◦ Software Depot website:

www.hpe.com/support/softwaredepot

• To view and update your entitlements, and to link your contracts and warranties with your profile, go to

the Hewlett Packard Enterprise Support Center

More Information on Access to Support Materials

page:

www.hpe.com/support/AccessToSupportMaterials

IMPORTANT:

Access to some updates might require product entitlement when accessed through the Hewlett
Packard Enterprise Support Center. You must have an HP Passport set up with relevant
entitlements.

Websites

Website

Link

Hewlett Packard Enterprise Information Library

www.hpe.com/info/enterprise/docs

Hewlett Packard Enterprise Support Center

www.hpe.com/support/hpesc

Table Continued

Support and other resources

75

«
...
73
74
75
76
77
...
»

Summary of Contents for SN3000B
































































































Reviews:

No comments

Related manuals for SN3000B

Brand: Cabletron Systems Pages: 88

Brand: PRO SIGNAL Pages: 5

Celabs Distribution Hub and Receiver

Brand: Cable Electronics Pages: 2

Brand: Aube Technologies Pages: 118

Brand: HMS Networks Pages: 16

Raritan Dominion LX II

Brand: LEGRAND Pages: 7

Brand: ATEN Pages: 17

Draco tera compact 480 Series

Brand: Ihse Pages: 244

Brand: Quintech Pages: 2

Brand: N-Tron Pages: 16

Brand: M-system Pages: 4

iBootBar iBB-DC8

Brand: Dataprobe Pages: 36

Brand: Alloy Pages: 13

ExtremeSwitching 3600 Series

Brand: Extreme Networks Pages: 51

Brand: Freestyle Pages: 5

Brand: Radio Shack Pages: 16

S5120-HI Series

Brand: H3C Pages: 4

RSMKOOS 136-3127

Brand: RS PRO Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands